StarTrac ST1000 Treadmill FS 0 Error

Probable Cause

Fail Safe Tripped

A) “ON/OFF” Power switch cycled too fast.
B) Faulty motor control board.
C) Faulty display cable.
D) Attempting to run after executing watchdog trip in motor test mode.

Corrective Action

A) Shut power switch "OFF" and wait ten seconds, then turn power switch "ON".

B) Swap motor control board with known good part. Replace motor control board if necessary.

C) Swap display cable with known good part. Do not route cable for testing purposes. Replace display cable if necessary.

D) Shut power "OFF" and wait ten seconds, then turn power switch "ON".