LifeFitness 9700, 9100 and 9500 Next Gen Treadmill Waxer No AC Power Error

Probable Cause

A) Broken, damaged or unplugged harness or Defective Wax/Lift PCB.
B) Wax motor or wire harness.

Corrective Action

A) Reset or replace waxer harness.

B) Cycle motor in waxer manual mode in diagnostics and verify 120VAC at the P6 connector on the Wax/Lift PCB.

      If voltage exists, verify that the cable from the Wax/Lift PCB to motor has continuity.

      If continuity exists, replace the wax motor.

      If no continuity, replace the wire harness.

      If no voltage exists, replace the Wax/Lift PCB.