LifeFitness 93T, 95Ti, 95Te, 97Ti and 97Te Treadmills Notify Maintenance Incline Timeout Error

Probable Cause

A) Lift Motor.
B) Level switch, negative switch.
C) Wire harness is defective.

Corrective Action

A) Cycle motor in incline manual mode and verify 120VAC at the P7 connector on the Wax/Lift PCB. If no voltage, replace the Lift Motor.

B) Enter Diagnostics, in incline manual mode; verify the operation of the switches. Replace switches if defective.

C) Verify the wire for continuity and replace wire harness if defective.