LifeFitness 93T, 95Ti and 97Ti Treadmills Waxer Unplugged Error

Probable Cause

Defective Wire Harness or Wax Motor

Corrective Action

Cycle motor in waxer manual mode in diagnostics and verify 120VAC at the P6 connector on Wax/Lift PCB.

If voltage exists, verify that the cable from the Wax/Lift PCB to wax motor has continuity.

If continuity exists, replace wax motor.

No continuity, replace the wire harness.

If no voltage exists, replace the Wax/Lift PCB.