Error 5 on Trotter/Cybex 600T Treadmill

Probable Cause

The error 5 on a Trotter/Cybex 600t treadmill is an elevation error and this means that the elevation switch did not find 0%.

Causes to check for an error 5:
a) Cables
b) Elevation motor

Corrective Action

First, cycle or reset the power by flipping the on/off switch to off and back on again.  Error may clear itself;  If error still present:
a) Check cables; Inspecting for good condition and good connection of cables.  Check the cable from the elevation motor to the lower board, cable from the elevation switch, and cable from the display to the lower board.  Replace any cable necessary.
b) Test elevation motor; Replace if necessary.

Related Items